Description:
Curing after compression molding, it is a essential step during the production of motor commutators. And the performance of curing equipment will directly affect the quality of commutators. Our HX series Commutator Drying Oven uses a large air flow rate blast circulation, built-in cycle channel and cycle air volume control and other advanced technology. The Oven has such advantages: fast heating speed, good thermal insulation properties, uniform temperature inside work room. All of them can ensure commutators keep performance conformity and no color difference.
The general accessory equipments are floor plug type of materials trolley, intelligent temperature control device, solid state relays for adjusting power.
Optional accessory equipments are printers, temperature recorder, DCS distributed control system and so on.
|
HX Series Main Technical Parameters Table ：
|
|
Category
|
HX-1
|
HX-2
|
HX-3
|
|
Studio Size
(W × D × H) mm
|
500×600×700
|
850×800×1000
|
1200×1200×1200
|
|
Temperature (℃)
|
Room Temp—250
|
Room Temp—250
|
Room Temp—250
|
|
Voltage / Frequency (V / Hz)
|
3—380/50
|
3—380/50
|
3—380/50
|
|
Heating Power (kw)
|
5.1
|
10.5
|
18
|
|
Temperature Uniformity (%)
|
±2.5
|
±2.5
|
±2.5
|
|
Temperature Fluctuations (℃)
|
±1
|
±1
|
±1
|
|
|
Note: The non-standard products according to user requirements.
|
|
