Overview:
The work room of HE series of vacuum drying oven is made of stainless steel. Heaters are placed around the work room.It’s temperature uniformity is very good. There are observation windows on the door for workers to observe the dry conditions of the parts. Door fitted with self-sucking pressing seals is well sealed. Compared with traditional vacuum oven, HS series has the following advantages: The vacuum chamber can be designed to be square, so the user can make full use of space. Gently close the door, it can be sucked automatically. The chamber can be vacuumed by high pumping speed to get a high vacuum degree which is a less than 100 Pa at most. Release Valves are installed in front of door, one piece in middle and another in right side. It is easy to operate, to release air slowly or rapidly. This type of oven applies in electronic industry, pharmaceuticals, chemicals, batteries, instruments and other industries to vacuum dry the materials and parts.
|
HE Series Vacuum Drying Oven Main Technical Parameters Table
|
|
Category
|
HE-1V
|
HE-2V
|
HE-3V
|
HE-4V
|
|
Studio Size
(W × D × H) mm
|
350×350×400
|
500×600×700
|
800×800×1000
|
800×800×1500
|
|
Temperature (℃)
|
Room Temp—250
|
Room Temp—250
|
Room Temp—250
|
Room Temp—250
|
|
Voltage / Frequency (V / Hz)
|
3—380/50
|
3—380/50
|
3—380/50
|
3—380/50
|
|
Vacuum Grade （Pa）
|
267
|
267
|
267
|
267
|
|
Heating Power (kw)
|
3
|
6
|
10.5
|
15
|
|
Temperature Fluctuations (℃)
|
±1
|
±1
|
±1
|
±1
|
|
|
Note: The non-standard products according to user requirements.
|
|
